Update: 202607
Activation and Storyline Selection
1. Power On
2. Network Configuration
Scan the QR code using your phone’s native camera. A prompt to join the network will pop up on the camera interface.
Tap the prompt, wait around 10 seconds, then close the camera app.
Open your phone’s network settings and connect to the Wi-Fi broadcast by the device.
The system will automatically redirect you to the network configuration page shown below. Select the Wi-Fi with the strongest signal, enter its password, and tap “Connect”.
Once the connection is complete, a notification will prompt that the smart head needs to restart. After successful reboot, voice prompts will announce that the network and server connections are established.
3. Activation
The smart head will verbally announce an activation code; write this code down. Visit the designated website to complete activation. Log into the Member Center to bind your device.
After entering the activation code, if the device name appears on the page, your device has been successfully activated.
4. Character & Storyline Selection
The Member Center offers a variety of characters with matching exclusive storylines to choose from.
5. Launch Storyline
Tap a storyline card in the Member Center to open the storyline confirmation pop-up window.
Tap “Start Story Experience” to pick your preferred storyline. For stable performance, we recommend rebooting the device before starting a conversation. The smart head will automatically switch to storyline mode afterward.
Special Circumstances
1. Change Wi-Fi Network
Press the black function key below the power button to enter network configuration mode.
2. Unbind Device
Log into the User Center to unbind your smart head device.
3. The browser network configuration page cannot pop up automatically after connecting to Annika’s Wi-Fi for network setup
Open the network configuration address 192.168.4.1 in your browser in advance. After connecting to Annika’s Wi-Fi for network setup, manually switch to the pre-opened network configuration address in the browser to enter the setup page.
Operation video for Android phones under English system environment:
4. Stories are selected on the AI Head page, but Annika gives no response
A prerequisite for successful activation is that the device is online, which means the system prompts “Server connection succeeded” after you power on the device.
5. Annika only responds after several rounds of conversation
Either your voice volume is too low for Annika to pick up promptly, or temporary network lag occurs.
6. Annika delivers overly intimate replies
You may switch back to the default character mode. As Annika is an adult intimate product, its dialogue design is inclined towards private and intimate interactions by default.
7. How to adjust Annika’s dialogue mode
You may switch back to the default character mode. As Annika is an adult intimate product, its dialogue design is inclined towards private and intimate interactions by default.
8. No dialogue available after activation
A device restart is required after completing network configuration and activation to enable conversation functions.
9. The binding code becomes invalid after unbinding and re-binding
The original binding code will expire once unbinding is completed. Restart the device to make it broadcast a new binding code.
10. OTA upgrade failed
Follow the steps below:
Step 1: Reconfigure the network and enter network pairing mode; the network configuration page will pop up on your mobile browser. Detailed operations:
Tap the black function key below the power button.
Scan the QR code using your phone’s native camera; a prompt to join the network will appear on the camera interface.
Tap the prompt, wait for 10 seconds, then exit the camera app.
Open phone network settings and connect to the target Wi-Fi Network.
The system will automatically load the network configuration page.
Step 2: Tap Advanced Options. Paste the link https://primesensationtech1.com/p_hdw/esp32/ota/check into the server address input box and tap Save.
Step 3: Repeat the full network configuration process following Step 1 and the user manual.
Step 4: Restart Annika and start the OTA upgrade.
11. How to cancel the subscription
Complete cancellation via the following steps:
Step 1: Log in to the Sedoll official website and click AI head config at the top right of the page.
Step 2: Enter the AI head config page and tap subscription
Step 3: Tap disable auto renew.
Step 4: Subscription cancellation finished. You can continue enjoying subscribed services for the current month, and automatic renewal will not take effect starting next month.
12. How to adjust the volume
the factory default volume is maximum; the volume will display as 0 when Annika is powered off
Follow the steps below
Step 1: Access the AI head configuration page
Step 2: Keep Annika powered on
Step 3: Drag the slider to adjust the volume
P.S. the factory default volume is maximum; the volume will display as 0 when Annika is powered off